15,581 research outputs found
Relevância das indicações de colonoscopia conforme os diagnósticos obtidos.
Trabalho de Conclusão de Curso - Universidade Federal de Santa Catarina. Curso de Medicina. Dapartamento de Clínica Cirúrgica
Incidência e fatores de risco associados a delirium dos pacientes em pós-operatório de cirurgias abdominais internados no Hospital Universitário de Florianópolis
Trabalho de Conclusão de Curso - Universidade Federal de Santa Catarina. Curso de Medicina. Departamento de Clínica Médica
Buildings acupuncture: regional characterization and assessment of Portuguese residential buildings
One of Europe’s largest energy consumption sources, the building sector is a focus area in the
European Commission’s plans for energy efficiency improvement and greenhouse gas emissions reductions.
Although legislative instruments already target new buildings’ sustainability, older buildings
represent the biggest share of Europe’s stock and should be renovated to effectively reduce emissions
in the sector. In Portugal, about 70% of the buildings were constructed before the implementation of
energy performance regulations in 1990 and are not energy efficient. The enforced remote routine from
the Covid-19 crisis evidenced thermal insulation issues and emphasized residential energy poverty
(EP) conditions of the Portuguese population.
Building owners can be key actors in the improvement of the national buildings stock’s energy
efficiency and should be included in the buildings’ renovation process. Nevertheless, the great diversity
of characteristics observed in the country’s residential buildings can be a roadblock in assessing and
providing information about the different dwelling types.
A bottom-up approach through the development of representative buildings typologies can be
an optimizing tool in the building renovation aiming for energy efficiency improvement, enabling the
proposal of sustainable retrofitting solutions for residential buildings on a larger scale. Therefore, this
dissertation performs a cross-country assessment on the Portuguese residential buildings stock towards
the definition of national representative typologies. A set of key building characteristics (e.g.,
area, floors, bearing structure) from the 2011 Census is used to identify predominant structural and
architectural characteristics in the country’s residential buildings’ stock. Sub-regions’ Energy Poverty
Vulnerability Index (EPVI) results and climatic zones guide the identification of priority statistical subsections
for residential renovation. Sub-regions’ Energy Performance Certificates and subsections’
street view images are also used to assess residential buildings’ predominant constructive solutions
and most distinctive visual elements. The most distinct building characteristics of the sub-regions were
considered in the typologies’ 3D models construction in SketchUp.
The results revealed Alentejo as the most distinct region regarding housing type and building’s
bearing structure. Açores, Madeira, Norte and Alentejo are the regions with the highest percentage of
sub-regions raking top five in vulnerability to EP. Tâmega e Sousa, Madeira and Baixo Alentejo are the
most representative sub-regions in the rank from different climatic zones. Key-feature tables gathering
the various regions’ residential buildings most distinct visual elements for all primary architectural
components (roof, storeys, openings, envelope, access, plot) helped select examples of buildings used
as a reference in the construction of the 3D models.
The main differences observed in the three typologies regards the presence of sub-levels (underground
floor), façade ornaments and structures, main accesses, number of openings, and plot (land lot)
placement. Baixo Alentejo stands out for its typology's lack of setbacks, with few openings, and façade
ornaments; Madeira’s most distinct visual element is the presence of an entry porch in its typology’s
main entrance; and Tâmega’s typology is the only one with underground level and veranda, with a
single flight of stairs and landing marking the main entrance.
The typologies resulting from this work can be optimizing tools for residential energy efficiency
renovation in sub-regions with vulnerable buildings stock, helping determine sources of energy inefficiency
through the estimative of the baseline energy demand of existing buildings, allowing the proposal
of adequate alleviation measures, and assisting with the integration of their owners as indispensable
stakeholders on a large-scale intervention.Uma das maiores fontes de consumo de energia da Europa, o setor da construção é uma área
foco nos planos da Comissão Europeia para a melhoria da eficiência energética. Embora instrumentos
legislativos já visem a sustentabilidade de novas construções, edifícios antigos representam a maior
parte do estoque da Europa e devem ser renovados para a redução efetiva das emissões no setor. Em
Portugal, cerca de 70% dos edifícios foram construídos antes da implementação de regulamentos de
desempenho energético em 1990 e não são energeticamente eficientes. A rotina remota forçada pela
crise da Covid-19 evidenciou problemas de isolamento térmico e realçou as condições de Pobreza Energética
(PE) residencial da população portuguesa.
Os proprietários de edifícios podem ser atores-chave na melhoria da eficiência energética do
parque imobiliário nacional e devem ser incluídos no processo de renovação dos edifícios. No entanto,
a grande diversidade de características observada nos edifícios residenciais do país pode ser um obstáculo
na avaliação e fornecimento de informações sobre os diferentes tipos de casas.
Uma abordagem bottom-up através do desenvolvimento de tipologias de edifícios representativos
pode ser uma ferramenta de otimização na renovação de edifícios visando a melhoria da eficiência
energética, permitindo a proposição de soluções de retrofitting sustentáveis para edifícios residenciais
em larga escala. Assim, esta dissertação realiza uma avaliação do parque de edifícios residenciais português
para a definição de tipologias representativas nacionais. Um conjunto de características principais
do edifício (por exemplo, área, pisos, estrutura de sustentação) extraídas do Censo de 2011 é usado
para identificar as características estruturais e arquitetónicas predominantes no estoque de edifícios
residenciais do país. O Índice de Vulnerabilidade à Pobreza Energética (EPVI) das sub-regiões e respetivas
zonas climáticas orientam a identificação de subseções estatísticas prioritárias para renovação residencial.
Os certificados energéticos das sub-regiões e imagens do Street View das subseções também
são usados para avaliar as soluções construtivas predominantes dos edifícios residenciais e os elementos
visuais mais distintos. As características de construção mais distintas das sub-regiões foram consideradas
na construção de modelos 3D das tipologias no SketchUp.
Os resultados revelaram o Alentejo como a região mais distinta em termos de tipologia habitacional
e estrutura portante do edifício. Açores, Madeira, Norte e Alentejo são as regiões com maior percentagem
de sub-regiões entre as mais vulneráveis à pobreza energética. Tâmega e Sousa, Madeira e
Baixo Alentejo são as sub-regiões mais representativas do ranking em diferentes zonas climáticas. As
tabelas de características principais reunindo os elementos visuais mais distintos dos edifícios residenciais
das diferentes regiões para componentes arquitetónicos primários (telhado, andares, aberturas,
envelope, acesso, lote) ajudaram a selecionar exemplos de edifícios que foram usados como referência
na construção dos modelos 3D.
As principais diferenças observadas nas três tipologias referem-se à presença de subníveis (subsolo),
ornamentos e estruturas de fachada, acessos principais, número de aberturas e implantação no
lote. O Baixo Alentejo destaca-se pela falta de recuos na sua tipologia, com poucas aberturas, e ornamentos
de fachada; o elemento visual mais distinto da Madeira é a presença de alpendre de entrada na
sua tipologia; e a tipologia do Tâmega é a única com cave e varandas, com um único lance de escada e
patamar a marcar a entrada principal.
As tipologias resultantes deste trabalho podem ser ferramentas de otimização para renovação de
eficiência energética residencial em sub-regiões com estoque de edifícios vulneráveis, ajudando a determinar
fontes de ineficiência energética através da estimativa da demanda energética dos edifícios
existentes, permitindo a proposição de medidas de alívio adequadas, e auxiliando na integração de
seus proprietários como stakeholders indispensáveis em uma intervenção em larga escala
Earnings quality : Eikon measure vs academic measure
Mestrado em Contabilidade, Fiscalidade e Finanças EmpresariaisO objetivo principal deste estudo é determinar se o modelo de qualidade dos lucros criado pela Thomson Reuters Eikon está de alguma forma correlacionado com um dos modelos académicos mais usados na literatura de EQ. Além disso, este estudo procura aprofundar o conhecimento sobre os modelos quantitativos elaborados por bases de dados eletrónicas, mais especificamente o modelo de EQ da Eikon. Para a primeira parte da análise foram realizados testes de correlação, de Spearman e Pearson, realizados entre os dois modelos. De seguida, foi construída uma regressão usando o trabalho de Bens et al. (2019), adaptada ao objetivo deste estudo. Os resultados obtidos na análise de correlação sugerem que o modelo Eikon está positivamente correlacionado com o modelo académico, embora seja um valor fraco para ambos os testes. Porém, em nenhuma das análises foi possível identificar um padrão ou motivo evidente para os resultados da correlação positiva por país, setor e ano. Além disso, determinou-se que a relação entre os dois modelos é melhor explicada quando se considera o tamanho da empresa, o nível de endividamento, o número de analistas que acompanham a empresa e o índice de rendibilidade dos ativos.The main aim of this study is to determine if the earnings quality model provided in Thomson Reuters Eikon is correlated with one of the most used academic measures for EQ. Moreover, this study tries to deepen the knowledge on the quantitative models created by electronic databases, namely the Eikon EQ score. For the first part of the analysis Spearman and Pearson correlation tests, were performed between the two models. After that, a regression was constructed using the work by Bens et al. (2019), adapted to the purpose of this study. The results obtained through the correlation analysis suggest that Eikon model is positively correlated with the academic model, albeit it being a small value for both tests. However, it was not possible to identify a pattern or evident reason for the positive correlation results by country, industry and year present in the sample. Additionally, it was determined that the relation between the both models is better explained when taking company size, level of debt, number of analysts following the firm and return on assets ratio.info:eu-repo/semantics/publishedVersio
Improvement of chickpea rhizobia by genetic transformation with symbiosis genes
Rhizobia are soil bacteria able to induce the formation of nodules in leguminous plants
and convert atmospheric nitrogen into assimilable forms to these plants. Some
Mesorhizobium species establish symbiosis with chickpea and can increase productivity
of this culture. Rhizobia symbiosis genes, such as nod and nif, are involved in nodule
development and nitrogen fixation. Nevertheless, genes involved in other molecular
mechanisms, namely stress response may influence the symbiotic interaction plantrhizobia.
The objective of this study was to evaluate the effects of overexpressing
symbiotic and stress response genes in the symbiotic performance of chickpea
Mesorhizobium. Mesorhizobium strains were transformed with pRKnifA, pRKnodD,
pRKenvZ and pRKgroEL (expression vector pRK415 with nifA, nodD, envZ and groEL
genes from M. mediterraneum UPM-Ca36T, respectively). From the four strains
transformed with extra nifA copies, only V15-b was able to increase plant biomass, when
compared to wild-type and empty vector strains. Among the four strains transformed with
extra nodD copies, ST-2 and PMI-6 showed a higher symbiotic effectiveness compared
to wild type and control strains. Additional copies of envZ led to in a higher symbiotic
effectiveness when introduced in PMI-6 and EE-7. Evaluation of the symbiotic
effectiveness of the four strains overexpressing groEL showed that only ST-2 improved,
compared to wild-type and empty vector strains. For all these strains the rate of nodule
formation was seen to be higher and further analysis of the infection process and nodule
histological analysis were performed. Overall, this study shows that extra copies of a
given gene may have different effects in the symbiotic effectiveness, depending on the
modified strain. This study contributes to a better understanding of the nodulation and
nitrogen fixation processes, namely regarding the contribution of non-symbiotic genes,
especially envZ, which was to our knowledge for the first time reported to be involved in
the rhizobia-legume symbiosis; Resumo:
Melhoramento de rizóbios de grão-de-bico por transformação genética com genes
simbióticos
Rhizóbios são bactérias capazes de induzir a formação de nódulos em leguminosas e
converter azoto atmosférico em formas assimiláveis por essas plantas. Algumas
espécies de Mesorhizobium estabelecem simbioses com grão-de-bico e conseguem
promover a produtividade desta cultura. Genes simbióticos, como nod e nif, estão
envolvidos na formação dos nódulos e fixação de azoto. No entanto, genes envolvidos
noutros mecanismos, nomeadamente a resposta ao stresse podem influenciar a
interação simbiótica planta-rizóbio. O objetivo deste estudo foi avaliar a eficiência
simbiótica de Mesorhizobium de grão-de-bico sobre-expressando genes simbióticos e
de resposta ao stresse. Estirpes de Mesorhizobium foram transformadas com pRKnifA,
pRKnodD, pRKenvZ e pRKgroEL (vetor de expressão pRK415 com nifA, nodD, envZ e
groEL de M. mediterraneum UPM-Ca36T, respetivamente). Das quatro estirpes
transformadas com cópias extras de nifA, apenas V15-b foi capaz de produzir um
aumento na biomassa das plantas inoculadas, quando comparada às estirpes selvagem
e com vetor vazio. Das quatro estirpes transformadas com cópias extras de nodD, ST-
2 e PMI-6 apresentaram maior eficiência simbiótica em comparação com as estirpes
controlo. Cópias adicionais de envZ resultaram numa maior eficiência simbiótica quando
introduzidas em PMI-6 e EE-7. A avaliação da eficiência simbiótica das quatro estirpes
que sobre-expressam groEL mostrou que apenas a transformação de ST-2 levou a uma
eficiência superior, em comparação com as estirpes selvagem e com vetor vazio. Para
todas estas estirpes, a taxa de formação de nódulos também foi melhorada, pelo que
análises do processo de infeção e da histologia dos nódulos foram efetuadas. Em geral,
este estudo mostra que um gene introduzido pode ter efeitos diferentes na eficiência
simbiótica, dependendo da estirpe modificada. Este estudo contribui para uma melhor
compreensão dos processos de nodulação e fixação de azoto, nomeadamente a
contribuição de genes não-simbióticos, especialmente envZ, que tanto quanto sabemos
não foi previamente descrito como envolvido nestas simbioses
Potters and vessels: consumers, markets and dynamics at play in the circulation of Gaulish terra sigillata: the evidence for the region under the influence of Olisipo (Lisbon)
South Gaulish terra sigillata made its appearance in Portuguese Lower Tagus river valley area at its earliest stages, succeeding its italic predecessor. The author focused its approach in market conditions: regional settlement characteristics, including demographical dimension of urban centres, cultural background of populations and communication networks at place. On the other hand, vessel circulation patterns were considered on the base of potter´s stamps. Quantitative data was addressed, showing the main role played in redistribution by Lisbon, and the almost exclusivity of La Graufesenque imports. Potter´s stamps suggest different circulation for the region when compared to provincial capital, Mérida. Chronological data obtained demonstrated that the floruit of south Gaulish imports occurred in the period 40-65 AD, suffering after a complementary competition by Hispanic productions. In spite of this, imports from the big Gaulish centre persisted until circa 120 AD.A terra sigillata sud-gálica surgiu nos mercados do Baixo Tejo Português desde etapas recuadas da exportação, na sequência dos produtos congéneres itálicos. O autor detém-se nas condições de mercado, nomeadamente na estrutura do povoamento, incluindo a dimensão demográfica dos centros urbanos, o 'background' cultural das populações e a rede de comunicações instalada.
Noutro sentido, os padrões de circulação dos vasos foram abordados a partir das marcas de oleiro. Os dados quantitativos tratados demonstraram o papel preponderante desempenhado por Olisipo, como a quase exclusividade dos produtos oriundos de La Graufesenque. As marcas sugerem também a utilização de diferentes circuitos de circulação entre a região e Mérida, a capital provincial lusitana.
Os dados cronológicos obtidos demonstram a existência de um floruit das importações gaulesas no período 40-65 d.C., sofrendo depois uma concorrência e complementaridade dos produtos congéneres hispanos. A despeito desta, as importações do grande
centro gaulês subsistiriam até cerca de 120 d.C.info:eu-repo/semantics/publishedVersio
CHASSIS DEVELOPMENT FOR A FORMULA STUDENT VEHICLE USING ADVANCED MATERIALS
The monocoque is a chassis that represents the skeleton of a racing vehicle, this is the largest
structure present within it, where all the components are mounted, as well as, all the loads are
transmitted. In this work, this structure is formed by sandwich panels, which are generally used in
motorsport areas, as well as in transportation vehicles where high rigidity is associated with low
weight, these types of panels have two outer faces with a core in the middle.
The present work is done around a chassis for a formula student electric vehicle for the FSIPLeiria
team, where the goal is, through the analysis of the various panels, according to the competition
rules, and the finite element analysis, to obtain a rigid structure that complies with the regulations
and will be able to compete in the future, then a project of the monocoque geometry was designed,
for the analysis of the dynamic loads, at the suspension attachment points, and torsional stiffness in
order to optimize the structure’s composition.
It was possible to conclude that the monocoque is a superior structure to a conventional tubular
chassis, made from steel tubes, in terms of bending and torsional stiffness, however, these advantages
come at a cost due to the complexity during the whole development process, as well as in production
and in monetary costs
- …